Browse » Home » » The Parts Of A 1964 Impala Interior Kit

The Parts Of A 1964 Impala Interior Kit

By Stephen Baker


The Chevrolet Impala model of a car was built many many years ago. It already has made a lot of variations until now, starting in 1958. Lower models are consist of taillights that are symmetrical triple. A full size model of Impala is considered today as the most popular. In year 1956, first full size model was created, highlighting design cues, specifically the grille. It has a metallic green color and white interior.

The 1964 type of automobile model became the most popular and considered as best selling. This was restyled, making it more round and soft. Its taillight has an upside down U shape and is made from an aluminum material which is placed above the taillights. Most models are featuring the engines in aluminum trim. The 1963 roof lines remains unchanged together with its back up lights. 1964 Impala interior kit is being changed in the next models.

The following are the interior details of this model. The air conditioner can be of different types, it may be deluxe factory, custom factory, corvair deluxe factory, and deluxe four season air conditioner. The deluxe factory removes up to quarter gallons of moisture per hour and the capacity for cooling is 2800 pounds of ice in a day. The custom factory is the same as the deluxe factory and can circulate cool air around the car.

Corvair types are suggested for installation to convertibles, sedan, or coupes. These are also used for conjunction in factory heaters. It uses 6 cycle compressors. And the last one is deluxe four season which contains a climate control system that can provide temperature on your preference. The cooling components function when the air is moving in the evaporators.

The AM FM push button radio contains 9 diodes and 9 transistors with printed circuit boards. The speakers has 10 ohms and is a full sized with 6 x 9 inches. You can also choose either you want to use the front or rear antenna. The manual radio contains 3 diodes and 6 transistors also with printed circuit boards. It has a direct audio system with 6 x 9 inches in size. It is also you choice of either rear or front antenna.

Hand portable spot lamps are used as 12 volt cigarette lighter. Floor mats or rubber mats are made of tire grade rubbers, which is a material that makes it new always. The different types and color of the mat will match any of your preferred interior designs. Litter containers are placed in front of rear seats. Its color may be fawn, blue, red, or black.

There are also speakers placed near the rear seats. It matches the speakers in front and are also high in fidelity. Both rear and front speakers may be switched simultaneously according to preference. Speakers also contain push buttons so you can switch from AM to FM or vice versa.

100 percent of nylon webbing material was used for the seat belts. These are tested in all state and federal tests for the specifications. The speed control and cruise control are used for relieving the driver in any tension that he or she may feel when driving. Electric clocks were made precise and were made reliable as source of time.

The standard equipment in all the lower models are still included here. It also has a cushion seat with an extra thick foam, aluminum front seat panels, panels with nameplate moldings, parking brake lights, etc. Impala is the top of the line, followed by Bel Air and then the Biscayne.




About the Author:



0 comments:

Post a Comment

 
(c) Copyright Abyan Rizqo | About | Contact | Policy Privacy