A record player is an apparatus for reproducing sounds from a phonograph record disc that is being spun by the turntable at a constant speed. The sound is reproduced by the vibrations picked up by the stylus or needle in the grooves of the vinyl. These vibrations are converted into electric currents and amplified for the loudspeakers to reproduce the sounds.
These parts of the apparatus need to be changed every time they are worn out due to constant use. This is specially true for record player needles because of friction created when it tracks in the grooves. Here are some basic tips in getting the best out from your phonographs to have a good sound quality.
Setting up the player would require an amplifier and speakers but speakers with an amplifier built inside them are already available so they can be used instead. Set the position of speakers according to which side they must be placed and put enough space in between the wall and speakers. Sit them on a foam when placing them on hard surfaces for the vibrations to be absorbed.
Buying second hand vinyls is better because they are cheaper than brand new ones particularly those found in charity shops, vintage markets and garage sales. Clean your records thoroughly and have the best possible sounding music when playing them. Machines are available who can clean them but they are alternatives that are cheaper.
Dust cover of the player must be down when it is not used to keep its cleanliness. Though when used, the option of having it down or having it taken off is dependent on your preference. Down dust cover may result with the sound resonating with it so there is a difference in the sound quality compared when the cover is taken off.
The platter mat is a material shaped like a disc that sits between the vinyl and player usually made of felt. It absorbs vibrations and steadily holds the record to improve sound quality. Felt is the most common material because it is the one usually included but cork and rubber tend to reduce vibrations better and cause less static.
The cartridge houses the needle and is replaceable because dust and debris can wear the needle down. If playing records regularly, annually changing the cartridge is advisable to keep its excellence in producing sounds. You may also consider upgrading for further improvements rather than just doing regular replacing.
Set the tracking force which is the weight of the cartridge on the vinyl and can be changed by turning the counterweight at the other side of the tonearm. There are guidelines available online or together with the product manual about the suggested tracking force. If the weight is too heavy then the music will be dull to listen to and if it is too light then it will be thin.
Make sure enough space is available in your place for your record player because they are bulky most of the time. Placing them somewhere that does not produce vibrations is important. If not, then the vibration will make the needle to skip and jump when being played.
These parts of the apparatus need to be changed every time they are worn out due to constant use. This is specially true for record player needles because of friction created when it tracks in the grooves. Here are some basic tips in getting the best out from your phonographs to have a good sound quality.
Setting up the player would require an amplifier and speakers but speakers with an amplifier built inside them are already available so they can be used instead. Set the position of speakers according to which side they must be placed and put enough space in between the wall and speakers. Sit them on a foam when placing them on hard surfaces for the vibrations to be absorbed.
Buying second hand vinyls is better because they are cheaper than brand new ones particularly those found in charity shops, vintage markets and garage sales. Clean your records thoroughly and have the best possible sounding music when playing them. Machines are available who can clean them but they are alternatives that are cheaper.
Dust cover of the player must be down when it is not used to keep its cleanliness. Though when used, the option of having it down or having it taken off is dependent on your preference. Down dust cover may result with the sound resonating with it so there is a difference in the sound quality compared when the cover is taken off.
The platter mat is a material shaped like a disc that sits between the vinyl and player usually made of felt. It absorbs vibrations and steadily holds the record to improve sound quality. Felt is the most common material because it is the one usually included but cork and rubber tend to reduce vibrations better and cause less static.
The cartridge houses the needle and is replaceable because dust and debris can wear the needle down. If playing records regularly, annually changing the cartridge is advisable to keep its excellence in producing sounds. You may also consider upgrading for further improvements rather than just doing regular replacing.
Set the tracking force which is the weight of the cartridge on the vinyl and can be changed by turning the counterweight at the other side of the tonearm. There are guidelines available online or together with the product manual about the suggested tracking force. If the weight is too heavy then the music will be dull to listen to and if it is too light then it will be thin.
Make sure enough space is available in your place for your record player because they are bulky most of the time. Placing them somewhere that does not produce vibrations is important. If not, then the vibration will make the needle to skip and jump when being played.
About the Author:
Get a summary of the things to keep in mind when picking a supplier of record player needles and more information about a reputable supplier at http://www.needlefinder.net now.
0 comments:
Post a Comment