Dry ice blasting is a special kind of blasting operation that involves the use of carbon dioxide gas in solid form. The gas is placed under pressure and low temperature in order to convert it to solid form. The cleaning process makes use of a combination of three main aspects. These aspects are sublimation, extreme temperature change, and kinetic energy. When in need of Dry Ice Blasting Pittsburgh should be visited.
The process in which solid carbon (IV) oxide gas changes to gaseous form directly without first turning to liquid is referred to as sublimation. This is a very important factor in this kind of cleaning operation since it makes sure that no waste residue is formed at the cleaning site due to the abrasive. Dry ice, which is solid carbon dioxide, is used in form of pellets.
People prefer using dry ice over other kinds of abrasives for several reasons. To begin with, dry ice is not toxic. This means that this abrasive does not cause any form of pollution to the environment. Since the material used in this form of cleaning does not cause pollution, it has been approved for usage by EPA in the US.
Another advantage that is associated with this operation is that dry ice is a non-abrasive material. That means that it does not cause any kind of damage to the surface that is being cleaned. Similarly, it is a non-conductive material. These qualities make it to produce no secondary waste, which can raise the cost of using this method.
As per the design of this method, the cleaning can take place while the equipment is still in use. This way, the cost of labor and time is reduced. The efficiency level of this technique is quite high and this leads to an improvement in efficiency in industrial works. The chances and severity of the equipment failing greatly reduces when the equipment and the system are kept clean. Hence, the system down time is reduced.
The method normally involves some temperature variations in the surface that has to be cleaned. In many cases, temperature of the surface drops. The drop in temperature is normally small and it usually falls back to normal after some minutes. The change in temperature is determined by the location of the surface being cleaned and the amount of dry ice that is used per minute.
There are safety concerns that are associated with using this method to clean surfaces. First, the pellets used for cleaning are usually propelled at a high speed. This often makes them dangerous to people and animals. As a rule of thumb, it is advisable to never point the gun at surfaces that are not being cleaned. The gun should also never be pointed at people or animals.
A number of companies render these service to the public. It is therefore easy to find a company to employ for this activities. Different service companies offer services of different quality and also charge different costs for their services. One should therefore put in consideration prior to making their choices on which company to work with.
The process in which solid carbon (IV) oxide gas changes to gaseous form directly without first turning to liquid is referred to as sublimation. This is a very important factor in this kind of cleaning operation since it makes sure that no waste residue is formed at the cleaning site due to the abrasive. Dry ice, which is solid carbon dioxide, is used in form of pellets.
People prefer using dry ice over other kinds of abrasives for several reasons. To begin with, dry ice is not toxic. This means that this abrasive does not cause any form of pollution to the environment. Since the material used in this form of cleaning does not cause pollution, it has been approved for usage by EPA in the US.
Another advantage that is associated with this operation is that dry ice is a non-abrasive material. That means that it does not cause any kind of damage to the surface that is being cleaned. Similarly, it is a non-conductive material. These qualities make it to produce no secondary waste, which can raise the cost of using this method.
As per the design of this method, the cleaning can take place while the equipment is still in use. This way, the cost of labor and time is reduced. The efficiency level of this technique is quite high and this leads to an improvement in efficiency in industrial works. The chances and severity of the equipment failing greatly reduces when the equipment and the system are kept clean. Hence, the system down time is reduced.
The method normally involves some temperature variations in the surface that has to be cleaned. In many cases, temperature of the surface drops. The drop in temperature is normally small and it usually falls back to normal after some minutes. The change in temperature is determined by the location of the surface being cleaned and the amount of dry ice that is used per minute.
There are safety concerns that are associated with using this method to clean surfaces. First, the pellets used for cleaning are usually propelled at a high speed. This often makes them dangerous to people and animals. As a rule of thumb, it is advisable to never point the gun at surfaces that are not being cleaned. The gun should also never be pointed at people or animals.
A number of companies render these service to the public. It is therefore easy to find a company to employ for this activities. Different service companies offer services of different quality and also charge different costs for their services. One should therefore put in consideration prior to making their choices on which company to work with.
About the Author:
You can find a list of the benefits and advantages of using professional dry ice blasting Pittsburgh services at http://www.asmenvironmental.com right now.
0 comments:
Post a Comment